Lab Plasticware

Lab Plasticware

Plastic labware for lab use made of polypropylene plastic. Now buy Plastic labware like beakers, test tube stand, measuring jars online at affordable prices.

Plastic labware is a cost-effective, less breakable alternative to laboratory glassware. There are laboratory plasticware options for industry, food science, and pharmaceutical labs. Beakers, flasks, test tubes, Petri dishes, pipettes, and graduated cylinders are typically made of glass, but plastic versions are available and have the advantage of being more durable and less expensive. Other plastic labware includes tubing, funnels, wash bottles, scoops, tweezers, and eye protection. The resins that the equipment is made from can be certified for use in a general lab, food lab, or pharmaceutical lab. Laboratory plasticware has another advantage over the traditional glassware in that it is recyclable, whereas the heat-resistant character of the glass used for lab equipment makes it non-recyclable.

 

Grid View:
Quickview

Analytical Funnels(Pack of 36pcs.)

?422.9

Designed specifically for analytical chemistry, the body of the funnels is 60°. Moulded in PolyPropylene, these funnels are provided with internal & external ribs to prevent air blockage..

Quickview

ATOMIC MODEL SET (JUNIOR)

?677.1

ATOMIC MODEL SET (JUNIOR) These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.  JUNIOR SET : This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a m..

Quickview

ATOMIC MODEL SET (Senior)

?2,965.3

ATOMIC MODEL SET (Senior) These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.  SENIOR SET : This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded b..

Quickview

Burette (Pack of 10 Pcs.)

?3,389.0

This Burette has a transparent acrylic pipe and a leak proof TPX stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric acide & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5..

Quickview

Conical Flasks (Pack of 12Pcs.)

?634.7

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autocloavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.  ..

Quickview

DESICCATOR (VACCUM)

?2,117.8

DESICCATOR (VACCUM) ESAW desiccators are made of polypropylene and polycarbonate. These autoclable vaccum desiccators can hold vaccum upto 740 mm of Hg for 24 hrs without any greasing. The top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy..

Quickview

Desiccator Plain

?1,694.1

Desiccator (Plain) Plain Desiccators are physically the same as Vaccum desiccators. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vaccum & Plan Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in t..

Quickview

DROPPING BOTTLE (PACK OF 12)

?295.8

Blown in Low Density Polyethylene, ESAW Dropping Bottles dispense small uniform drops of liquids when pressed lightly..

Quickview

Fisher Clamp

?804.2

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8". PACK OF 12 PCS. FOR SINGLE CLAMP PACK OF 6 PCS. FOR DOUBLE CLAMP..

Quickview

Flask Stand (Pack of 6 Pcs.)

?846.0

Moulded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10 Ltr. Capacity. This stackable flask stand can also be steam autoclaved...

Quickview

Float Stand (16 MCTs of 1.5 ml.)(Pack of 12 Pcs.)

?1,694.1

This float rack molded in polypropylene is quite compact, autoclavable and can hold 16 micro certrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a centeral rod handle for convenient lifting...

Quickview

Funnel Holder

?1,270.3

Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" or 3/8". PACK OF 12 PCS. FOR SINGLE HOLDER PACK OF 6 PCS. FOR DOUBLE HOLDER..

Quickview

Funnels- Long Stem (Stem Length and Size- 100mm.)

?692.6

These long stem funnels have smooth walls, 60° cone angle and external ribs to prevent air lock. Moulded in polypropylene, these clear funnels can also be steam autoclaved...

Quickview

Funnels- Long Stem (Stem Length and Size- 100mm.)

?719.5

These long stem funnels have smooth walls, 60° cone angle and external ribs to prevent air lock. Moulded in polypropylene, these clear funnels can also be steam autoclaved...

Quickview

Industrial Funnels(Pack of 6 Pcs.)

?2,541.5

Industrial funnels are designed in such a way that they make filling of carboys, drums and barrels very convenient. The handles of these funnels make their handling very easy...

Showing 1 to 15 of 76 (6 Pages)