Electricity and Electrical Equipments

Electricity and Electrical Equipments

Electrical equipment includes any machine powered by electricity. It usually consists of an enclosure, a variety of electrical components, and often a power switch.

Electrical equipment supplies power to facilities and work projects. Electrical products and power management supplies can be used to run equipment and install electrical systems into buildings. Wires, fittings, and switches are necessary for making repairs to electrical systems. Circuit breakers, pushbuttons, and other electrical parts can be used to create electrical components. Portable power supplies keep job sites up and running when wired electricity is not available.

Grid View:
Quickview

A.C. Position Control System (11205)

?0.0

11205 - ESAW A.C. Position Control System Specifications * 2-phase Servomotor 12V/phase,50Hz, 10W * Power amplifier for driving * Servo potentiometer type error detector * In-built 10.00V(rms) panel meter * Step response capture/display card * Detailed literature with typical results Included * Complete unit except a measuring CRO..

Quickview

A.C. Servomotor Study (11160)

?0.0

11160 - ESAW A.C. Servomotor Study Specifications * 2-phaseA.C. Servomotor- 12V/ 50Hz per phase * Small generator for loading * 4-digitspeed display * 3-digittime constant display * 3% digit r.m.s. voltmeter * 3%digitD.C. panel meter * Voltage regulated internal supplies * Detailed literature with sample results..

Quickview

ACCUMULATORS BATTERY (PEEC-1008)

?507.6

ACCUMULATAORS BATTERY BY ESAW MANUFACTURER OF SCIENTIFIC INSTRUMENTS IN INDIA In high impact polystyrene case with handle and terminals marked positive and negative. Recommended for applications involving less frequent discharges not exceeding 0.75A. Supplied uncharged, without acid. Charging instructions printed on the case. Output 2V. Availabl..

Quickview

BATTERY HYDROMETER (PEEC-1062)

?295.8

Pipette type, comprising a rubber squeeze bulb, glass float calibrated having colored zones for charged, partly charged. comprising glass float calibrated having colored zones for charged, partly charged and uncharged conditions. Compressible bulb and rubber tube with fittings to glass body. Used to test cell..

Quickview

BELL DEMONSTRATION MODEL (PEEC-1031)

?592.4

All the components of an electric bell are mounted on a large panel for easy demonstration to the group of students. Provides complete dissected view with all components and wiring clearly visible with large sized parts. Operates on 3-4 volts DC. Shows the working of a simple electric bell. ..

Quickview

Boltzman Constant Kit (10953)

?0.0

10953 - ESAW Boltzman Constant KitThe experimental kit provides the following facilities: (a) A digital millivoltmeter (0-9.99 V) to measure the voltage across the diode. (b) A highly stabilized power supply whose voltage cars of ImVusing a ten turn potentiometer. © A digital currentammeter (0-500mA)...

Quickview

Capacitance and Permitivity Kit (10962)

?0.0

10962 - ESAW Capacitance and Permittivity Kit Completely self contained : no other measuring instruments are needed. © No calibration required * High sensitivity: change of the order of 0.1 nf.can  easily be detected. © Integrated circuit electronics. * Linearity better than 1% f.s.dIn operation it produces an output current pro..

Quickview

Capacitance Substitution Box

?0.0

ESAW Capacitance Substitution Box EEC-211Comprising 12 non-polarised capacitors ranging from 100pF to 0.47?F (470?F) using standardly preferred values, in step ratios of approximately 1:2 Selection is by means of a rotary switch and the external connection is via a pair of 4mm sockets. All capacitors are of ± 2% tolerance, 250VD.C.Working..

Quickview

CHARGED POROUS POT (PEEC-1009)

?211.0

For use in electrochemistry for the construction of voltaic cells...

Quickview

Compensation Design (EEC-10631)

?0.0

ESAW EEC-10631 Compensation DesignSpecificationsSimulated “uncompensated” system having adjustable damping. Peak percent overshoot variable P, from 20% to50%,and steady-state error variables from 50%to0.5%Compensation network implementation through the built-in variable gain amplifier. Gain is adjustable from 1 to11Built-in..

Quickview

CONTACT KEY (PEEC-1003)

?380.5

Comprising a plated spring strip arm with thumb-press knob, a contact stud, plated connecting strip and a pair of 4mm socket terminals, all mounted on a moulded plastic base. ..

Quickview

Crompton Potentiometer Complete Setup (PEEC-1063)

?19,914.4

It is an instrument designed to measure an unknown voltage by comparing it with a known voltage. The known voltage may be supplied by a standard cell or any other known voltage-reference source.  Each Slide wire division is equal to 1/2 millivolt or 500 microvolts.  • Coarse and fine rheostats are provided. Terminals for 2 volts batte..

Quickview

D.C. Motor Study (11151)

?0.0

11151 - ESAW D.C. Motor Study Specifications * Study of a 12V, 8WD.C.Motor * Small generator(2W)forspeed pick up and loading * 4-digitspeed display * 3-digittime constant display * 3% digit voltmeter and current meter for D.C. measurement * IC regulated power supply * Supporting literature with experiment details...

Quickview

D.C. Position Control System (11187)

?0.0

11187 - ESAW D.C. Position Control System Specifications * Position control of a 12V,1A D.C. gear Motor (50)rpn * Provision for positive and negative techo generator feed back Techo constant:2V/1000 rpm approximately * Calibrated dial for reference and output Position resolution 01 * P based wave form capture card * Literature and pa..

Quickview

D.C. Speed Control System (11196)

?0.0

11196 - ESAW D.C. Speed Control SystemSpecifications * Speed control of a 12V, 4W permanent magnet D.C. Motor * Speed range:0 to3000 rpm (typical) * Opto -interrupter based speed in rpm * 4-digitspeed display in rpm * Electronic techo generator for feedback * Separate unit for motor in a see- through cabinet * Essential accessory - a CR..

Showing 1 to 15 of 278 (19 Pages)